Buy CTM Cooling Tower Replacement Parts from VIBES Corp

R-130 SPRAY SYSTEM

MAINTENANCE FREE - OPTIMUM TOWER PERFORMANCE

The new spray system has several unique features which enables optimum tower performance at all times, with minimal maintenance. The most important feature is a dramatic reduction in the number of nozzles. If you retrofit a 1000 ton tower built before 1976, an R130 system requires only 30 nozzles compared to 1000 on the original tower. A 1000 ton tower built after 1976 has 200 nozzles which will again be reduced to 30 R130 nozzles.

See a Demonstration Movie of how the CTM R130 Spray System Retrofit will save on Your Maintenance and Operating Costs...

BLADE TYPE ELIMINATORS

This durable inexpensive blade, PVC eliminator replaces wood or asbestos eliminators.

CELLULAR TYPE ELIMINATORS

The cellular PVC drift eliminators are stronger & more efficient than the blade type eliminator.

PVC FILL MEDIA

This state-of-the-art, high efficiency PVC honeycomb fill replaces obsolete & inefficient corrugated steel fill, MNA asbestos fill & wooden lath splash fill.

CELLULAR INLET REMOVERS

Replaces obsolete & hazardous asbestos cement louvers & plywood louvers.

DRIVE FAN SHAFTS

The new non corrosive composite graphite drive shafts are stronger & lighter for longer life & performance. Also available hollow tube & solid fan shafts in mild steel
or s/steel for cooling towers, closed circuit coolers & air handling units.

FAN BLADES & HUBS

TUF-LITE® FIBERGLASS COOLING TOWER FANS

Tuf-Lite® fans are constructed of light weight corrosion resistant, fiberglass reinforced vinyl ester or epoxy resins. Tuf-lite II® are available in adjustable pitch or energy saving Auto Variable® pitch hubs, for new applications or retrofit existing.

FAN WHEELS

Heavy duty fan wheels for all makes & models of cooling towers, closed circuit coolers & air handling units.

FAN CLAMPS & BALANCING CLIPS: Complete range of fan clamps & balancing clips are in stock for all fan wheels & balancing requirements.

SAFETY LADDERS PLATFORMS & HANDRAILS

Safety regulations require access ladders, safety cages, perimeter handrails & walkways as per Ontario Ministry of Labour Bill 208 standards. All in stock & available for immediate installation & hot dipped galvanized after fabrication.

Download the Ontario Fixed Access Ladders Engineering Data Sheet PDF

GEAR REDUCERS

New & rebuilt with complete warranties, for all makes of cooling towers. Gear Reducer parts, lubrication and accessories available. A complete range of half couplings, neoprene bushings, boston couplings are available in stock.

MOTORS - NEW & REBUILT

Cooling tower motors operate in hars conditions. Windings must be triple dipped & baked. Customized drain holes & seals required on motors in discharge air streams. All motors have full warranties.

BEARINGS

Split sleeve & solid sleeve bearings pillow block & flange mounted bearings are in stock at ALL times for all makes & models of towers & air handling units.

ACCESSORIES

Stainless steel & hot dipped galvanized hardware, pre-pressure treated marine grade plywood & quality grade lumber. Polyurethane caulking & sealants. Two part solvent free polymeric coating system for cooling tower interiors & air handling units.

ALL IN STOCK.

FIRE RETARDANT FIBERGLASS

FIBERGLASS CASING & LOUVERS: Fire retardant fiberglass casing, corner rolls, access doors & louvers (8oz, 12oz, 16oz & 24oz) all colours available.

FLOAT VALVES & FLOATS

Heavy duty float valves complete with aluminum bar and stainless steel adapter for convenient lateral and vertical adjustment.

SIDE STREAM FILTRATION

Provides continuous filtering of cooling or process waters to remove suspended solids such as airborne silt, sand organic matter, as well as waterborne contaminant's such as scale & corrosion products, microbiological & other organic matter.

ELECTRICAL ACCESSORIES

Cold water basin immersion heaters, automatic level controls. Variable frequency drives. Two speed motor control panels, slow closing solenoid valves. Anti-vibration limit switches.

NEW! CTM SAFETY ACCESS DOORS

Non-Corrosive Access Doors Designed With Operator Safety in Mind!

Optimally Sized to Suit Each Cooling Tower Installation!

Exclusively from CTM!

• CTM Safety Access Doors promote operator safety and save maintenance dollars into the bargain!
• CTM Safety Access Doors are larger than present 17" or 22" circular steel doors, are non-corrosive, optimally sized to suit each cooling tower and easily retro-fitted into existing large and small tower installations.
• CTM Safety Access Doors promote full and safe access to the cold water basin for cleaning and maintenance - often without the need to actually enter the tower!
• Adding two CTM Safety Access Doors on larger forced draft towers will allow easy access for maintenance crew and allow safe extraction of personnel in the event of an emergency.
• "Awkward and dangerous access to the cold water basin is a thing of the past with CTM Safety Access Doors."

Contact VIBES Corp