Member: BC Hydro Power Smart Alliance - Energy Saving Equipment & Services.
Member: ComplyWorks & ContractorCheck - Vendor Compliant - Registered Property Management for Commercial Buildings, Infrastructure Facilities & Canadian Subscriber Industries.

Buy Metalon Lubrication / Grease from VIBES Corp

 

 

METALON FRICTION REDUCTION

METALON LUBRICANTS
are a hydrocarbon complex specifically formulated to help reduce friction and wear of ferrous and non-ferrous metals

The Cost-Effective results are:

  • *INCREASED PERFORMANCE
  • *LONGER EQUIPMENT LIFE
  • *ENERGY SAVINGS
  • *REDUCED SYSTEM TEMPERATURES
  • *REDUCED COSTLY MAINTENANCE & DOWNTIME

METALON is the key component in all METALON PRODUCTS TM.
Special formulations are blended for specific environments to ensure compatibility with the lubrication system media. Unlike oil additives, METALON unites chemically with the metal component molecules to form a microscopic monomolecular wear-resistant shield. This unique characteristics of chemical bonding to metal prevents "drain off" during idle periods.

 

METALON is present to protect the contact surfaces against the detriments of cold starts. Blended with petroleum oils and most synthetic oils, METALON substantially reduces the extensive metal removal associated with "break-in" periods.

 

Longevity is increased due to the burnished precision fit and wear reduction created by the presence of METALON.

METALON M
Crankcases and Mechanical Equipment

METALON M contains powerful solvents and detergents to rid the lubrication systems of sludge and carbon deposits. It is applied to: Crankcases, Mechanical Gear Boxes, Differentials, Transfer Boxes, Sliding Mechanisms, Cutting, Threading and Machining Oils, Bearings, Filtered Compressor Sumps, Bushings and much more.
Packaging: 12x250ml, 12x1L, 4L, 4x4L, 20L, 205L
METALON TREATMENTS

METALON C2
A Universal METALON Formulation


METALON C2 can replace METALON M wherever there is no need for solvents or detergents in the lubrication system and will substantially improve the performance of AUTOMATIC TRANSMISSIONS.
Compatible with GM DEXRON III and FORD TYPE fluid used in most transmission and some hydraulic systems, its unique molecular bonding, lubricates, protects and preserves the proper functioning of the precision hydraulic servo systems, pumps, metering valves and gear shift mechanisms.

METALON C2, a non-solvent, multi-purpose formula, can be blended with gas-oil mixtures for Two-Stroke Power Sources, such as: Chain Saws, Grounds Keeping & Golf Course Maintenance Equipment, Logging Machinery, Outboard Motors, Snow Machines, Jet Skis, Model Aircraft Engines, and the like.

METALON C2 blends with oils and fluids for Hydraulic Systems, Hydraulic Cranes, Self Loaders, Hydraulic Power Generators, Compressors, Metal Machining and Forming, etc.
Packaging: 12x250ml, 4L, 4x4L, 20L, 205L.


METALON HI-TECH EP 1.5 GREASE (Specs Below)
The Superior Lubricant

 

METALON HI-TECH EP 1.5 GREASE is a superior multi-use high performance lubricant. Its unique overbased calcium sulfonate foundation couples with the exceptional properties of METALON EP provides the ultimate New Generation lubricating medium that is unmatched in the industry.

METALON HI-TECH EP 1.5 GREASE guards against rust, corrosion, oxidation, water washout and offers excellent thermal stability through temperatures ranging from -40 degreeC/F to 300 degreeC (570 degreeF intermittently, sustainable to 250 degreeC/482 degreeF) and IT'S REVERSIBLE! (Returns to its original buttery state when cooled).
An added bonus: 

METALON HI-TECH EP 1.5 GREASE blends favorably with lithium and many other greases, permitting easy replacement of lesser quality greases, it meets or exceeds all NLGI Specifications as it relates to heavy duty wheel bearing lubrication, specifically those specifications designated under the code identifier: "G/C-L/B" ratings. Packaging: 10x400g, 60x400g, 20Kg, 55Kg, 180Kg


METALON SPRAY PENETRANT
Anti-Wear Friction Fighter

 

METALON SPRAY PENETRANT is a hydro-carbon complex specifically formulated to help reduce wear and friction of ferrous & non-ferrous metals that will help to increase production and service life of equipment, reduce down-time and crucial wasteful maintenance expenditures.
Packaging: 12x400g


MEGALENE
Gas System Treatment

 

MEGALENE GAS SYSTEM TREATMENT, now with METALON is a new and improved hydrocarbon complex that incorporates components which are ashless , non-phosphorus, and perform as multi-functioned detergents.
These proprietary components provide excellent rust protection in both leaded and unleaded gasolines.
Packaging: 12x250ml, 12x1L, 4L, 4x4L, 20L, 205L


MEGASEL
Diesel Fuel System Treatment

 

MEGASEL DIESEL FUEL SYSTEM TREATMENT, now with METALON, is a new and improved hydrocarbon complex that is used to maintain distillate fuel in a sludge-free stabilized condition.

MEGASEL arrests many of the problems related to storage, transportation and combustion of fuels used in diesel turbines, fuel-oil burning boilers, steam generators and internal combustion engines.
Packaging: 12x250ml, 12x1L, 4L, 4x4L, 20L, 205L

 


 

Click here to EMail Vibes Corp

 

TECHNICAL SPECS

 

METALON M is a hydrocarbon complex specifically formulated to help reduce friction and wear of ferrous and non-ferrous metals and save energy. Unlike oil additives, METALON M unites chemically with the metal component molecules to form a microscopic, monomolecular wear-resistant shield. Blended with most synthetic or petroleum oils, the exclusive METALON M formula helps to reduce maintenance costs and increase production and service life of mechanical equipment.

When combined with conventional metal cutting and machining oils, METALON M helps to maintain the sharpness of the tool cutting edges, allows deeper cuts per pass, while producing a smoother finish with less energy.

Applied to the lubrication systems of the new equipment, METALON M substantially reduces the extensive wear and metal removal associated with 'break-in' periods; thereby increasing equipment longevity. METALON M creates a burnished, precision fit between mating parts, which reduces friction.

One of the significant and unique characteristics of METALON M is its chemical bonding capability. METALON M will not drain off metal surfaces during idle periods, but rather remains in place to protect the parts during cold starts.

METALON M is applied at a ratio of 5% (min.) or 100mL for every two litres of lubricant to: Crankcases, Mechanical Gearboxes, Differentials, Transfer Boxes, Sliding Mechanisms, Cutting and Machining Oils, Bearings, Filtered Compressor Sumps, Bushings and much more. (Some applications may require a higher ratio of METALON M to realize maximum benefit as dictated by results and experience.)

 

INSPECTION DATA:
(According to ASTM Specifications)

DESCRIPTION ASTM RESULTS
Specific Gravity D-1298 1.015
Colour D-1500 1.5
Flash Point °F (°C) D-992 200 (94)
Cloud Point °F (°C) D-97 -40. (-40)
Pour Point °F (°C) D-97 -60. (-51)
Viscosity, SUS D-445   
@ 100 °F (40 °C)    57
      9.50 cSt
@ 210 °F (100°C)    29.0
      1.90 CST
Viscosity Index    30.0
Rust Test by      
Synthetic      
Sea Water    D-665
PASS      
Corrosion Test,      
Copper Strip      
@ 212 °F (100 °C) D-130 NO CORROSION
Foam Test (1,2,3) D-892 NO FOAM
Ash Content D-482 .6% by wt.
TIMKEN OK LOAD?      
@ 5% concentration D-2782 > 60 lbs
FALEX FINAL TORQUE      
@4500 lb. Jaw Load D-2271 < 60 in.-lb

NOTE: The information and data presented herein are based on tests, reports, and research we believe to be accurate and reliable. The information and data are provided without warranty, guarantee or liability on our part, and are therefore, provided to customers for their own investigation, verification, and consideration.

METALON HI TECH EP GREASE SPECIFICATIONS


INFORMATION and ASTM/ENGINEERING DATA  

 

METALON HI-TECH EP 1.5 GREASE is a

INSPECTION DATA:.

 

superior multi-use, high temperature,

(According to ASTM Specifications)

 

over-based complex lubricant. The principle of

 

 

over-basing is not new. Calcium sulphonates

DESCRIPTION

ASTM TYPICAL

have provided mechanical and thermal stability

DROPPING POINT

 

and exceptional resistance to water and

C/F

D-2265 300/575

corrosion for many years. However, the

SHEAR STABILITY:

 

dispensing, pumpability and low temperature

Penetration @ 250°C

D-217

properties were poor. Through sophisticated

Worked 60 strokes

285-315

research in complexing methods, a new

@ 10,000 strokes

1°/

generation of grease has been developed,

@ 100,000 strokes

2%

which offers extra bonuses.

@ 10,000 strokes w/

 

 

50°/ water

285-315

The unique combination of this latest grease

ROLL STABILITY:

D-1831 +3%

technology of over-based complex calcium

 

 

sulphonates, PLUS 1.5 penetration, PLUS

EXTREME PRESSURE:

 

METALON EP offers characteristics and

Timken Value Kg/Ib

D-2509 34/75

qualities unmatched by lithium or other greases.

4-Ball Wear Test

D-2266

Its penetration of NLGI 1.5 bridges the #1 and #2

@ 40kg-scar (mm)

0.32

grades, reduces inventories and misapplication

LWI, kg

D-2783 70+

problems, while enhancing the pumpability and

`Held Point, kg

500+

dispensing properties.

 

 

 

WHEEL BEARING LEAKAGE

 

 

gms. @ 163°C1325°F

D-1263 0.4

METALON HI-TECH EP 1.5 GREASE protects

 

 

against rust, corrosion, oxidation, water

WATER WASHOUT:

 

washout and displays excellent stability through

@ 79°C/175°F°/ Loss

D-1264 < 3

temperatures ranging from -40°C/F to 300°C

 

 

(>570°F) and it is reversible. The METALON

RUST, (1=PASS):

D-1743 1,1,1

component of the formula will chemically bond

 

 

to the metal contact surfaces, providing

CORROSION RESISTANCE:

 

residual anti-wear protection, even when

Copper Corrosion

D-1261 PASS

the grease is squeezed out.

Bearing Corrosion

D-1743 PASS

 

OXIDATION (PSI LOSS)

 

METALON HI-TECH EP 1.5 GREASE is

@ 100 Hrs.

D-0942 0

catalogued in the Canadian Government

@ 500 Hrs.

2

Cataloguing System (CGCS) and assigned the

@ 1000 Hrs.

9

NATO Stock No. (NSN) 9150-21-905-7275,

 

 

and is listed at the NATIONAL DEFENSE

LOW TEMP. TORQUE:

 

HEADQUARTERS.

@ -40oC/-4OoF

D-6311 8.0

 

After 5 Min.

3.7

 

After 10 Min.

3.5

TYPICAL USES: Industrial, Farm Production

 

 

and Construction Machinery, Automotive,

BASE OIL:

 

Mining and Marine Equipment, Gears, Bearings,

Visc. SUS @100°F

D-2161 600

Stuffing Boxes, Automatic Lube Systems, Oven

@210°F

70

Conveyors, High/Low Speed Mechanisms,

Pour Point °C/°F

D-97 -17/+2

Military Equipment, Tractor Fifth Wheels and

Flash Point°C/°F

D-92 245/475

most other Grease Applications.

 

 

 

DOLOUR-TEXTURE: BLUE, BUTTERY & SMOOTH

 

NOTE: The information and data presented herein are based on tests, reports and research we believe to be accurate and reliable. The information and data are provided without warranty, guarantee or liability on our part, and are therefore, provided to customers for their own investigation, verification and consideration.

 

 

 

 

 

VIBES Corp accepts:

"Accurate Analysis, Diagnostic Evaluations, Corrections on All Types of Machinery"
Vibrations, Noise, Dynamic Balance, Performance, Laser Shaft & Drive Alignment,
Electro-Mechanical Repairs, ACCU-GUARD PdM ProgramTM Monitoring Contracts, DUE DILIGENCE Verification Studies.
Agents / Specialists: Industrial & Commercial Fans, Rotors, Blowers, Cooling Towers,
Motors, Magnetic (ASD) Drives.
24/7 EMERGENCY SERVICES • SALES • TRAINING COURSES

 
 


Click here to EMail Vibes Corp

VIBES Corp accepts:

 

copyright  2013 Vibes Corp

vibration analysis fan balancing homepage

 

top